Since 2013, OSHA inspectors have visited Weir Slurry Group, Inc. in Wisconsin 3 times.
The most recent inspection opened on Aug 9, 2017 on a referral, in Madison.
In all, OSHA issued 2 citation items: 1 serious and 1 other-than-serious.
The proposed penalties came to $21,729; today they stand at $13,581, 37% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Weir Slurry Group, Inc. averages $13,581 across 1 cited inspection.
Weir Slurry Group, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
228employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Incident on Jul 31, 2017: Employee sustains leg injuries and concussion after being st
At 10:30 a.m. on July 31, 2017, Employee #1 was operating the Mazak Megaturn Nexus 900M CNC vertical turning lathe, Serial No. 263752, at a company that manufactures pumping equipment for mining industries. Employee #1 was machining an upper bearing housing, Part No. 574598-016-51, which was secured to a fixture using threaded push rods, and the fixture was then secured in the CNC spindle jaws. The spindle jaws, fixture, and upper bearing housing were rotating around fixed tooling that was machining an inner surface of the bearing housing. The rotational speed was approximately 400 to 500 RPM. The employee had not installed holding clamps in addition to using the push rods to secure the bearing housing to the fixture, in accordance with the employers documented procedure that he had been trained on. The upper bearing housing became dislodged from the fixture during the turning cycle, and the fixture then became dislodged from the spindle jaws of the CNC machine. The bearing housing came to rest within the CNC enclosure, but the fixture was ejected from the CNC machine after it struck the sliding door/machine guard, causing the lower track mechanism to dislodge. This action allowed the fixture to be ejected out of the CNC machine, where it struck the legs of Employee #1, resulting in soft tissue damage to the right leg and bone contusions. The employee also sustained a concussion when he struck his head on a pallet, as he fell to the floor. Employee #1 was working alone at the time of this incident, but other employees were in the immediate area. The employee was hospitalized for two or more days due to his injuries.
No citations from this inspection.
Inspection 342145117 OPENED FEB 28, 2017Closed
Complaint · Partial · Safety · 1,300 employees at the site · Closed Oct 24, 2017
Incident on Feb 8, 2017: Employee falls into maintenance pit and is injured
At 11:00 p.m. on February 8, 2017, an employee was mopping the floor at a pump manufacturing facility when he fell into an unguarded maintenance pit. The maintenance pit measured 80 inches by 80 inches and was 86 inches deep. The maintenance pit had a retractable rope stanchion for a warning line that was located at the edge of the maintenance pit. As the employee was walking backwards, mopping the floor, he ran up against the warning line, lost his balance and fell into the pit. The employee sustained a laceration to his head and 5 broken ribs, which he was hospitalized and received treatment.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Madison site logged 2 recordable injuries or illnesses among about 275 workers: 0.7 per 100 full-time workers, against a median of 1.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Weir Slurry Group, Inc.
Madison · 2020
275
2
0
0.7
1.9
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.
(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:
Other mechanical power transmission equipment manufacturing employers in Wisconsin
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.