Since 1984, OSHA inspectors have visited Worthington Industries in Ohio 6 times.
The most recent inspection opened on Mar 9, 2021 on a referral, in Delta.
In all, OSHA issued 21 citation items: 12 serious and 9 other-than-serious.
The proposed penalties came to $56,605; today they stand at $37,978, 33% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Worthington Industries averages $12,193 across 3 cited inspections.
Worthington Industries also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
265employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
OSHA records show Worthington Industries at 6 sites in 2 states. Together they've had 13 inspections and $142,799 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 6 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Mar 2, 2021: Employee sustains burns from arc flash during troubleshootin
At 1:40 p.m. on March 2, 2021, Employee #1, a 23-year-old male, was troubleshooting hot spots identified in a thermography report at a worksite. He deenergized the load side and verified zero energy before beginning the task. While checking the tightness of lugs on the load side terminals, Employee #1 determined that the top right terminal was loose. The line side was live, and as soon as he touched the terminal with an Allen wrench, an arc flash occurred. The employee suffered burns to his face, neck, head, hands, and upper body. He was hospitalized for treatment. He was not wearing electrically rated PPE aside from a flame-resistant uniform. This was the first time Employee #1 had attempted this task.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Delta site logged 10 recordable injuries or illnesses among about 204 workers: 4.9 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 7 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Worthington Steel Delta
Delta · 2023
204
10
3
4.9
3.6
Worthington Cylinders Jefferson
Jefferson · 2023
221
9
4
4.5
2.8
Worthington Steel Monroe
Monroe · 2023
159
3
0
2.0
3.6
Worthington Samuel Coil Processing Cleveland West
Cleveland · 2023
74
1
1
1.3
3.6
Worthington-Samuel Coil Processing Cleveland West
Cleveland · 2022
73
3
1
4.2
3.6
Worthington-Samuel Coil Processing Cleveland W
Cleveland · 2021
70
3
2
4.0
2.7
WS Delta
Delta · 2020
204
3
2
1.5
3.6
WC Jefferson
Jefferson · 2020
163
5
3
3.4
2.8
Included with any plan: 25 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Aug 1, 2024, Cleveland: Amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
Employees were repairing a hydraulic cylinder. The injured employee was aligning a cylinder with a clevis at the holding table of a slitter to replace a holding pin. The cylinder shifted and amputated their left middle fingertip.
An employee was feeding two strips of narrow pieces of steel into a reel. There were some cracked edges on the strip of metal. His hand was pulled toward the spacer causing his finger to get caught in/between the spacer (metal disc) and the steel strip that cuts the steel in the over arm (part of the reel/guide to keep cut straight). This occurred at the 72 slitter on the exit reel.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.