Wva Manufacturing, LLC: OSHA inspections and violations
Alloy, West Virginia · Nonferrous Metal (except Aluminum) Smelting and Refining · NAICS 331419
8inspections
7citation items
$27,239current penalties
Aug 15, 2025last inspection
Since 2011, OSHA inspectors have visited Wva Manufacturing, LLC in West Virginia 8 times.
The most recent inspection opened on Aug 15, 2025 on a referral, in Alloy.
In all, OSHA issued 7 citation items: 6 serious and 1 other-than-serious.
The penalties, $27,239 in total, stand where OSHA first set them.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Wva Manufacturing, LLC averages $9,454 across 2 cited inspections.
Wva Manufacturing, LLC also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
West Virginia · latest 90 days of OSHA records
29employers cited
Get notified the morning OSHA posts each new citation in West Virginia: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Alloy site logged 19 recordable injuries or illnesses among about 183 workers: 7.2 per 100 full-time workers, against a median of 2.2 for its industry. Those cases cost 281 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
WVA Manufacturing, LLC
Alloy · 2025
183
19
6
7.2
2.2
WVA Manufacturing
Alloy · 2023
245
6
2
2.1
2.2
Alloy, WV
Alloy · 2016
249
20
6
7.5
2.2
Included with any plan: 5 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.
Aug 12, 2025, Alloy: Hospitalization · thermal burns third degree or higher · multiple body parts n.e.c.
At about 7:30 p.m. on August 12, 2025, an employee was using a backhoe to excavate accumulated slag and debris from a furnace tap area and ladle pit. Residual water in the material had not fully evaporated; upon disturbance, it reacted violently, resulting in an explosion. The employee suffered first, second, and some third-degree steam burns, mainly to the arms and knees with additional burns to…
An employee was performing maintenance on the second level of a silo. While they were making sure the belt pulley were not seized up, the belt was powered on, causing the employee's finger to get caught in the sheave. Their left little finger was partially amputated.
Nov 3, 2020, Alloy: Hospitalization · fractures · chest, except internal location of diseases or disorders
An employee was helping unload a skid steer off a truck skip. While positioned with his left foot on the skid steer's step and his right foot on the tire, he was helping unhook the chains from the truck skip and slipped and fell backward, landing on the rear rail of the truck skip. He suffered six broken ribs and a flail chest injury.
An employee was replacing the carbon set on a furnace. His fingers were caught in the carbon/head intersection of the furnace, causing the partial amputation of his right ring finger and an injury to the right middle finger.
On 08/10/18, at approximately 2:00 AM, a maintenance employee was performing repairs to an oxygen line that was part of a plant's oxygen air system. The employee repaired the hose, tightened the clamp on the hose, and instructed another employee to turn the oxygen back on. When the oxygen was turned back on, the hose exploded in the maintenance employee's hands. The employee was hospitalized…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(d) Mounting—(1) Inspection. Immediately before mounting, all wheels shall be closely inspected and sounded by the user (ring test) to make sure they have not been damaged in transit, storage, or otherwise. The spindle speed of the machine shall be checked before mounting of the wheel to be certain that it does not exceed the maximum operating speed marked on the wheel. Wheels should be tapped gently with a light nonmetallic implement, such as the handle of a screwdriver for light wheels, or a wooden mallet for heavier wheels. If they sound cracked (dead), they shall not be used. This is known as the “Ring Test”.
29 CFR 1910.23 · Guarding floor and wall openings and holes
Alert subscribers get notified of each newly cited employer in West Virginia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.