Ads Manufacturing Ohio LLC: OSHA inspections and violations
Middletown, Ohio · Plate Work Manufacturing · NAICS 332313
6inspections
22citation items
$16,200current penalties
Jun 11, 2020last inspection
OSHA has inspected Ads Manufacturing Ohio LLC 6 times in Ohio since 2012.
The latest one began on Jun 11, 2020 after a complaint, in Middletown.
Those inspections ended with 22 citation items: 16 serious and 6 other-than-serious.
Penalties were first proposed at $54,817 and now stand at $16,200, 70% lower after settlements or reviews.
Forklifts and other powered industrial trucks comes up most often in these citations: 4 items under 1910.178.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Ads Manufacturing Ohio LLC averages $900 (2 cited inspections).
Ads Manufacturing Ohio LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
263employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Ads Manufacturing Ohio LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Middletown site logged 1 recordable injury or illness among about 23 workers: 4.9 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
ADS Manufacturing Ohio LLC
Middletown · 2025
23
1
0
4.9
3.6
Included with any plan: 5 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(b)(5)(iv)
(iv) Space within the spray booth on the downstream and upstream sides of filters shall be protected with approved automatic sprinklers.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.