Youngstown, Ohio · Sheet Metal Work Manufacturing · NAICS 332322
3inspections
3citation items
$30,585current penalties
May 7, 2024last inspection
Aerolite LLC has 3 OSHA inspections on record in Ohio, the first in 2023.
OSHA's last visit started on May 7, 2024 on a referral, in Youngstown.
Across those inspections OSHA issued 3 citation items: 1 serious and 2 other-than-serious.
OSHA proposed $17,970 in penalties and the amount has not been reduced.
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Aerolite LLC averages $10,195 over 3 cited inspections in that time.
Aerolite LLC also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
273employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Youngstown site logged 8 recordable injuries or illnesses among about 134 workers: 6.0 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 77 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Aerolite LLC
Youngstown · 2025
134
8
3
6.0
2.9
Included with any plan: 2 more yearly logs from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
May 2, 2024, Youngstown: Hospitalization · cuts, lacerations, punctures without injury to internal structures · foot (feet), toe(s) unspecified
An employee was investigating the status of a magnetic proximity switch on a loader when the loader retracted back and their left foot became caught between the loader and the frame, resulting in lacerations to the foot.
Aug 16, 2023, Youngstown: Hospitalization · fractures and burns · upper and lower limb(s)
An employee was operating an extrusion press when a part got caught at the cooling table. The employee went to retrieve the part when they were struck by the returning puller. The employee sustained a left femur fracture, bilateral leg lacerations, and bilateral wrist burns.
An employee was standing at ground level and looking in the back of a tractor trailer to take inventory. A forklift that was loading product, backed into the injured employee and caused them to fall. They sustained injuries to the legs and feet.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(C) Where lockout is used for energy control, the periodic inspection shall include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(n)(6)
(6) The driver shall be required to look in the direction of, and keep a clear view of the path of travel.
Each employer shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.
Other sheet metal work manufacturing employers in Ohio
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.