Since 1994, OSHA inspectors have visited Apc Paper Co., Inc. in New Hampshire 10 times.
The most recent inspection opened on Jul 9, 2018 on a referral, in Claremont.
In all, OSHA issued 46 citation items: 31 serious, 3 willful and 12 other-than-serious.
The proposed penalties came to $307,534; today they stand at $180,266, 41% less.
The rule cited most here is 1910.261 (pulp, paper, and paperboard mills), 19 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Apc Paper Co., Inc. averages $6,466 across 1 cited inspection.
1 inspection on this page followed a fatal incident.
Apc Paper Co., Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New Hampshire · latest 90 days of OSHA records
52employers cited
Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.
Incident on Jul 7, 2018: Employee injures skull when struck by falling motor
At 7:30 on July 7, 2018, Employee #1 was remounting a motor. The motor rolled over onto the employee's head. He sustained a skull fracture and was hospitalized.
Incident on Jul 26, 2010 (fatal): Employee is pulled through paper machine and dies
On July 26, 2010, Employee #1, an employee of a temporary agency, was working at APC Paper Company, Inc. for three weeks as a forklift operator. On the day of t he accident, Employee #1, was operating the drum reel and drum winder of a paper machine. Earlier, the paper machine had a paper break, requiring coworkers to t hread an approximately 2 ft wide paper "tail" through the machine. The "tail", a narrow piece of paper, was threaded from machine part to machine part while the entire machine was operating at full speed, between 1,200 and 1,500 ft a minute . The paper was threaded into the machine to the drum reel and then to the drum winder, a machine part that takes the paper at the machine's end and forms a log of paper on a steel mandrel. The action between the drum winder and mandrel wou ld create a nip point. The nip point was initially formed 3 ft off the floor and was 12 ft 10 in. wide. The machine was operating at a speed of 1,250 ft per min ute, and for some reason, the paper was building up unevenly on the mandrel. Emp loyee #1 was "evening out the reel", operating the reel by hand feeding the pape r into the nip point, and he was pulled into the running nip points. Employee #1 was taken to a hospital, where he was pronounced dead.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Claremont site logged 0 recordable injuries or illnesses among about 60 workers: 0.0 per 100 full-time workers, against a median of 1.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
APC Paper Company, Inc.
Claremont · 2020
60
0
0
0.0
1.9
Included with any plan: 4 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was hit in the head with a motor that fell when its support bolt was removed. The employee sustained a head laceration.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.10 · Recording criteria for cases involving occupational hearing loss
29 CFR 1904.10(a)
(a) Basic requirement. If an employee's hearing test (audiogram) reveals that the employee has experienced a work-related Standard Threshold Shift (STS) in hearing in one or both ears, and the employee's total hearing level is 25 decibels (dB) or more above audiometric zero (averaged at 2000, 3000, and 4000 Hz) in the same ear(s) as the STS, you must record the case on the OSHA 300 Log.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
(C) The employer develops monitoring and inspection data that supports the demonstrations required by paragraphs (c)(5)(i)(A) and (c)(5)(i)(B) of this section;
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.