Coating Industries, Inc.: OSHA inspections and violations
Houston, Texas · Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers · NAICS 332812
2inspections
4citation items
$9,497current penalties
Jan 31, 2022last inspection
Since 2014, OSHA inspectors have visited Coating Industries, Inc. in Texas 2 times.
The most recent inspection opened on Jan 31, 2022 as a planned inspection, in Houston.
In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.
The proposed penalties came to $15,828; today they stand at $9,497, 40% less.
The rule cited most here is 1910.107 (spray painting and finishing), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Coating Industries, Inc. averages $7,397 across 1 cited inspection.
Coating Industries, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
394employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Planned · Complete · Health · 39 employees at the site · Closed May 2, 2022
6414 Thomas Road, Houston, TX 77041 · Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers · OSHA's record · Phone and website on Google Maps
Planned · Complete · Safety · 50 employees at the site · Closed May 8, 2015
6414 Thomas Road, Houston, TX 77041 · Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers · OSHA's record · Phone and website on Google Maps
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Houston site logged 0 recordable injuries or illnesses among about 32 workers: 0.0 per 100 full-time workers, against a median of 3.2 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Shop
Houston · 2017
32
0
0
0.0
3.2
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
May 5, 2018, Houston: Hospitalization · fractures · leg(s), unspecified
An employee was performing blasting work from an 8-foot step ladder when either his foot or weight shifted, causing him to lose balance and fall to a lower level. He fractured his right leg and was hospitalized.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) When do I have to post the annual summary? You must post the summary no later than February 1 of the year following the year covered by the records and keep the posting in place until April 30.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(b)(5)(iv)
(iv) Space within the spray booth on the downstream and upstream sides of filters shall be protected with approved automatic sprinklers.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.