Cudd Pressure Control, Inc.: OSHA inspections and violations
Robstown, Texas · Support Activities for Oil and Gas Operations · NAICS 213112
10inspections
12citation items
$15,839current penalties
Jan 22, 2025last inspection
OSHA has inspected Cudd Pressure Control, Inc. 10 times in Texas since 1984.
The latest one began on Jan 22, 2025 on a referral, in Big Lake.
Those inspections ended with 12 citation items: 3 serious and 9 other-than-serious.
Penalties were first proposed at $24,083 and now stand at $15,839, 34% lower after settlements or reviews.
Ladders in general industry comes up most often in these citations: 3 items under 1910.23.
How that compares: the median penalty per cited inspection for mining and oil and gas employers since 2015 is $2,883, and Cudd Pressure Control, Inc. averages $10,214 (1 cited inspection).
3 inspections on this page followed a fatal incident.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
398employers cited
9 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Cudd Pressure Control, Inc. and get notified the morning OSHA posts a new citation for it.
OSHA records show Cudd Pressure Control, Inc. at 17 sites in 3 states. Together they've had 19 inspections and $29,339 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 17 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jun 8, 2004: Three employees were burned in gas well flash fire
Employees #1, 2, and 3 were at a well site and were burned when the pipe blew ou t of the hole and ignited. All three employees were hospitalized with burns and fractures.
Incident on Aug 3, 2001 (fatal): Employee killed in fall from top of spool of coiled tubing
On August 3, 2001, Employee #1 was preparing a spool on a coil tubing unit for c hange out and replacement with another spool containing different diameter pipe or tubing. A coil tubing unit is a mobile unit that carries 15,000 to 20,000 fee t of pipe coiled around a spool for deployment into existing oil or gas wells. E mployee #1 was standing on top of the spool, about 12 feet above ground level. A s he cut the tubing to free it from the injector, the approximately 10-foot in d iameter spool he was standing on began to turn slowly. The spool's hydraulic sys tem was engaged, the brake was not set, and the spool was not secured or chained . In addition, Employee #1 had tied his safety lanyard off to the rim of the spo ol. Tied at the waist and unable to unhook his lanyard, Employee #1 was subseque ntly pulled through a 10-inch gap between the spool and its frame. The lanyard b roke away and the spool then made several revolutions before another operator co uld climb up into the control room to stop the spool. The incident resulted in a fatal injury to Employee #1, who was asphyxiated.
Incident on Jan 5, 1987 (fatal): Two employees overcome by natural gas; one drowns
Employee #1 was in a fractionation tank sampling the return fluid from a well-je tting workover operation that used natural gas when he lost consciousness. Emplo yee #2 attempted to rescue Employee #1, and he also fell unconscious. Two cowork ers rescued Employee #2, despite being affected by the gas in the tank. Employee #1 drowned. No respiratory protection was available or used.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 1903.2(a)(1) · Posting of notice; availability of the Act, regulations and applicable standards
Incident on Sep 6, 1984 (fatal): Fall from an elevation
Three employees were pushing 1-in.-diameter pipe into a gas well. The well press ure was approximately 8000 pounds. The employees bent a 30-foot joint in the pro cess. Since the operation had just started, the second joint was removed so that future problems could be avoided. The lower snubbers were holding the first joi nt. The three employees climbed onto the stack to gain access to the lower porti on of the hydraulic snubbing jack. To straighten the upper portion of the pipe a bove the lower snubbers, the employees pried the pipe with a walking boomer. The first joint, which was not held by the snubbers, shot out of the hole, leaving the well wide open. Two of the employees were knocked off and fell 25 feet to th e ground. The other employee was wearing a safety belt. He received abrasions fr om the sand and dirt particles that were shot from the pressured well. One of th e employees died. Another was hospitalized for his injuries.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 1910.132(a) · Personal protective equipment, general requirements
Serious
$490
$125
Sep 26, 1984
Final
Citation 2, item 1
29 CFR 1903.2(a)(1) · Posting of notice; availability of the Act, regulations and applicable standards
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jan 17, 2025, Big Lake: Hospitalization · nonfatal 'crushing' injuries · hand(s), finger(s) unspecified
An employee was changing out the tong heads in the power tongs on a drilling rig when they became energized and crushed the employee's hand.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1903.2 · Posting of notice; availability of the Act, regulations and applicable standards
29 CFR 1903.2(a)(1)
(a)(1) Each employer shall post and keep posted a notice or notices, to be furnished by the Occupational Safety and Health Administration, U.S. Department of Labor, informing employees of the protections and obligations provided for in the Act, and that for assistance and information, including copies of the Act and of specific safety and health standards, employees should contact the employer or the nearest office of the Department of Labor. Such notice or notices shall be posted by the employer in each establishment in a conspicuous place or places where notices to employees are customarily posted. Each employer shall take steps to insure that such notices are not altered, defaced, or covered by other material.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(a)
(a) Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.
29 CFR 1910.145 · Specifications for accident prevention signs and tags
29 CFR 1910.145(c)(1)(ii)
(ii) All employees shall be instructed that danger signs indicate immediate danger and that special precautions are necessary.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.