Globe Metallurgical, Inc.: OSHA inspections and violations
Selma, Alabama · Nonferrous Metal (except Aluminum) Smelting and Refining · NAICS 331419
15inspections
57citation items
$144,599current penalties
Apr 27, 2018last inspection
Globe Metallurgical, Inc. has 15 OSHA inspections on record in Alabama, the first in 1990.
OSHA's last visit started on Apr 27, 2018 after a fatality or catastrophe, in Selma.
Across those inspections OSHA issued 57 citation items: 41 serious and 16 other-than-serious.
OSHA proposed $194,614 in penalties. After settlements and reviews the total is $144,599, down 26%.
Most often, OSHA cited 1910.305, electrical wiring methods (6 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Globe Metallurgical, Inc. averages $12,934 over 1 cited inspection in that time.
5 inspections on this page followed a fatal incident.
Globe Metallurgical, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
OSHA records show Globe Metallurgical, Inc. at 4 sites in 3 states. Together they've had 33 inspections and $179,548 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 4 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on May 6, 2018 (fatal): Employee is killed in explosion caused by molten silicon
At 11:15 p.m. on May 6, 2018, Employee #1 was using a powered industrial truck to pull a crucible of molten silicon to a cooling/treating area. When the trailer hit rough ground, the molten silicon spilled overtop of the crucible, causing it to slosh forward and spill onto the ground. As the molten silicon came in contact with water on the ground, an explosion occurred. Employee #1 suffered burns to his hand, face, neck and legs, and was killed.
Incident on Oct 26, 2012 (fatal): Employee falls from ladder and dies
On October 26, 2012, Employee #1 was taking samples of material being fed to a conveyor. He attempted to climb a ladder and fell breaking his neck. Employee #1 was killed.
No citations from this inspection.
Inspection 334534948 OPENED MAY 31, 2012Closed
Follow-up · Partial · Safety · 102 employees at the site · Closed Jun 27, 2012
Incident on May 28, 2004 (fatal): Employee killed when burned by furnace explosion
On May 28, 2004, Employee #1, the furnace operator, was burned over at 85 percen t of his body when Furnace Number 2 exploded. Employee #1 was hospitalized and d ied from his injuries on June 4, 2004.
Incident on Jul 28, 1996 (fatal): Employee dies from burns after furnace explosion
On July 28, 1996, Employee #1 was using a stoking machine to stoke a submerged a rc furnace. The stoking machine resembles a forklift with an approximately 20 ft long boom in the front that has a shovel-type tip for pushing. Employee #1 was in the stoker, pushing the hot mix in the furnace toward the electrodes when the furnace erupted. The eruption propelled hot mix from the furnace all around the floor and produced a flash fire wall around the electrode. The eruption caused a large explosion that shook the entire building. Employee #1's cotton clothing caught on fire and he went down a set of stairs to the employee bathroom. When h e could not extinguish the flames, he went down another set of stairs to the gro und floor. A coworker saw him and sprayed him with water from a hose. Employee # 1 suffered diffuse cutaneous burns and was transported to Four Rivers Medical Ce nter, where he later died. Employee #1 was apparently in the cab of the stoker w hen the eruption occurred since his hard hat was found on the cab floor. The sto ker is enclosed with steel and has only one exit and a small opening for visibil ity. It was designed to help to protect the operator from the radiant heat, betw een 1,500 and 1,700 degrees F, produced by the furnace.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 1910.132(a) · Personal protective equipment, general requirements
Incident on Sep 21, 1990 (fatal): Two employees killed and one injured in explosion and fire
At approximately 1:00 a.m. on September 21, 1990, an experimental furnace used t o produce silicon carbide exploded and a subsequent fire occurred at the Globe M etallurgical Inc. Research and Development facility. Employees #1 and #2 were ha rvesting silicon carbide from the furnace and were equipped with aluminized hood s, aluminized jackets, gloves, and safety shoes. Employee #3 was operating the f urnace's hydraulics behind a shield and was protected from the force and fire of the explosion. Employee #3 aided Employees #1 and #2 in getting out of the acci dent area. Employees #1 and #2 suffered burns over 80 percent of their bodies. E mployee #1 died approximately 10 hours later; Employee #2 died 12 days later; an d Employee #3 suffered minor smoke inhalation but required no hospitalization. A ll three employees were subcontracted by Globe through Eagle Construction Compan y. An internal water leak in the furnace, possibly due to a bad or faulty weld, allowing water to contact the hot material caused the furnace to explode.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Selma site logged 2 recordable injuries or illnesses among about 82 workers: 2.3 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 33 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Globe Metallurgical, Inc.
Selma · 2023
82
2
1
2.3
2.9
Globe Metallurgical, Inc
Selma · 2022
86
5
1
4.9
2.2
Globe Metallurgical Inc. - Selma Plant
Selma · 2017
46
5
2
9.1
2.9
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Apr 24, 2018, Selma: Hospitalization · second degree heat (thermal) burns · multiple body parts, n.e.c.
An employee was transporting a ladle from the furnace to the casting area using an industrial truck. The front tire hit a pothole causing the molten silicon to spill to the ground which caused an explosion resulting in second degree burns to the employee's face, upper back, left arm and neck.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Compressed gases. The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in § 1910.6.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(a)
(a) Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.