Since 1973, OSHA inspectors have visited Maples Industries, Inc. in Alabama 17 times.
The most recent inspection opened on Oct 19, 2022 on a referral, in Scottsboro.
In all, OSHA issued 35 citation items: 14 serious and 21 other-than-serious.
The proposed penalties came to $102,226; today they stand at $76,424, 25% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 8 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Maples Industries, Inc. averages $12,315 across 6 cited inspections.
Maples Industries, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 6 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Incident on Dec 27, 2021: Employee suffers amputation when machine cycles after jam
At 1:45 p.m. on December 27, 2021, an employee was working as a machine operator at a carpet and rug mill. She was operating "the New 4x6". This was a machine that had been designed and built by her employer. The employer had designed and built other similar machines. For the machine to run, a roll of plastic was loaded on the dispensing roller. As the plastic is dispensed, labels were placed onto the plastic. A machine operator placed a rug onto the bed of the machine. The rug was pulled into the machine, where it was partially rolled. At the appropriate time, the plastic that had been cut to length was fed onto the rug, and both were rolled into the finished labeled product. The rug was then dropped onto a lifter than tilted up and dropped the rug onto a conveyor. The conveyor transported the rug to another operator, who placed it into a bag and put the bagged rug aside for packaging and shipment. The plastic was cut to length when a sensor detected that the plastic was in place and ready to be cut. At the time of the incident, the machine had been getting jammed. A new roll of plastic needed to be loaded onto the machine, but the machine had been jamming. The plastic was jammed just before it went past the knife for to be cut. The employee was working with maintenance and inspection coworkers. The policy was for employees to turn off the machine in order to clear a jam. This time, the machine was on and energized after the new roll of plastic sheeting had been loaded. When the employee reached over to grab the bunched or jammed plastic, the sensor activated the knife to cut the plastic. The employee suffered a finger laceration and avulsion. She went to an orthopedic doctor, who determined that the injury amounted an amputation instead of an avulsion. The employee was treated without hospitalization.
Incident on Dec 2, 2019: Employee injures wrist and back in fall from rack
At 2:00 p.m. on December 2, 2019, an employee was removing metal decking from a pallet storage rack level that was six feet from the floor. The decking dropped down while he was on it. The employee was hospitalized to treat a broken left wrist and back disk compression.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Scottsboro site logged 7 recordable injuries or illnesses among about 350 workers: 2.2 per 100 full-time workers, against a median of 1.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Maples Industries Plant 1
Scottsboro · 2025
350
7
0
2.2
1.9
Maples Industries Plant 2
Scottsboro · 2025
159
8
4
5.0
1.9
Maples Industries
Scottsboro · 2024
704
19
4
3.1
1.9
Maples Industries Plant One Location
Scottsboro · 2024
438
14
1
3.5
1.9
Maples Industries Plant Two Location
Scottsboro · 2024
209
4
2
2.1
1.9
Maples Industries Plant Three Location
Scottsboro · 2024
57
1
1
3.0
1.9
Maples Industries Plant Four Location
Scottsboro · 2020
10
0
0
0.0
1.9
Included with any plan: 31 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 6 reports on file.
Nov 5, 2024, Scottsboro: Hospitalization · fractures · thigh(s)
An employee was walking to a machine when she slipped and fell to the floor, resulting in a fractured right femur.
Dec 27, 2021, Scottsboro: Amputation · amputations · fingertip(s)
An employee was changing plastic on a machine. The plastic-cutting blade engaged and amputated the tip of the employee's left ring finger.
Aug 19, 2020, Scottsboro: Hospitalization · fractures · thigh(s)
An employee fell from the second floor of a creel rack, suffering a broken left femur.
Mar 10, 2020, Scottsboro: Hospitalization, amputation · amputations · fingertip(s)
An employee was operating the crosscut machine, which uses table extensions for cutting larger rugs. To unfold a table, the employee pushed in the left bracket and then went to push in the right bracket. When he pushed in the bracket that is underneath the table, the extension came down, catching his fingertip between the middle and right table extensions. This resulted in a partial amputation…
Dec 2, 2019, Scottsboro: Hospitalization · fractures · wrist(s)
An employee was removing shelving from a storage rack. The employee was positioned on the shelving when the rack became unstable as screws were removed, which caused the employee to fall approximately 6 feet to the floor below. The employee suffered a fractured left wrist.
An employee was operating a 4x6 roll-up machine. While she was straightening a rug that became off-center, her right hand/arm was pulled into the machine's rollers, fracturing her forearm.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
29 CFR 1904.2(b)(2)
(2) How do I determine the correct NAICS code for my company or for individual establishments? You can determine your NAICS code by using one of three methods, or you may contact your nearest OSHA office or State agency for help in determining your NAICS code:
(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.