Priefert MFG. Co., Inc.: OSHA inspections and violations
Mount Pleasant, Texas · Farm Machinery and Equipment Manufacturing · NAICS 333111
10inspections
43citation items
$97,075current penalties
Nov 17, 2015last inspection
OSHA has inspected Priefert MFG. Co., Inc. 10 times in Texas since 1974.
The latest one began on Nov 17, 2015 after a fatality or catastrophe, in Mount Pleasant.
Those inspections ended with 43 citation items: 20 serious, 2 repeat and 21 other-than-serious.
Penalties were first proposed at $154,875 and now stand at $97,075, 37% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 6 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Priefert MFG. Co., Inc. averages $4,900 (1 cited inspection).
2 inspections on this page followed a fatal incident.
Priefert MFG. Co., Inc. also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Nov 9, 2015 (fatal): Employee is run over by forklift and killed
At 2:45 p.m. on November 9, 2015, a worker was operating a forklift. As the forklift was still moving, the worker jumped to the ground for an unknown reason. The forklift struck the worker and ran over his left side, killing him. him.
Incident on Oct 9, 2013 (fatal): Employee is electrocuted
At 3:15 p.m. on October 9, 2013, Employee #1 was modifying and upgrading electrical equipment and circuits in the control cabinet of a heavy-duty, variable-speed, combination straightening machine and coil cradle. The employee either directly or indirectly made contact with the energized equipment or circuits and was electrocuted.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Mount Pleasant site logged 33 recordable injuries or illnesses among about 906 workers: 3.5 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 263 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Priefert Manufacturing
Mount Pleasant · 2017
906
33
8
3.5
2.7
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.
Oct 12, 2020, Mount Pleasant: Hospitalization · fractures · pelvis
While loading tubing product, an employee fell from a tractor-trailer and broke his pelvis.
Jun 4, 2020, Mount Pleasant: Hospitalization · cuts, lacerations · upper arm(s)
An employee was monitoring tubing as it exited the run-off table into a bin. A piece of pipe struck him as it was falling into the bin causing a laceration to the right upper arm.
Nov 9, 2015, Mount Pleasant: Hospitalization · fractures · knee(s)
An employee was moving product with a forklift. When he exited the vehicle, the forklift began to roll. He attempted to re-enter the lift and was struck by the front tire, suffering an open fracture to his left knee. The parking brake was not set at the time of the incident.
An employee was conducting a quality audit of livestock gates when the gates came down on him. He was pinned and sustained a pelvis injury, requiring hospitalization.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(b)(5)(iv)
(iv) Space within the spray booth on the downstream and upstream sides of filters shall be protected with approved automatic sprinklers.
29 CFR 1910.107(c)(7)
(7) Lamps. Electric lamps outside of, but within twenty (20) feet of any spraying area, and not separated therefrom by a partition, shall be totally enclosed to prevent the falling of hot particles and shall be protected from mechanical injury by suitable guards or by location.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.