Progress Rail Services Corporation: OSHA inspections and violations
Albertville, Alabama · Recyclable Material Merchant Wholesalers · NAICS 423930
6inspections
24citation items
$25,632current penalties
Feb 28, 2020last inspection
OSHA has inspected Progress Rail Services Corporation 6 times in Alabama since 1994.
The latest one began on Feb 28, 2020 on a referral, in Arab.
Those inspections ended with 24 citation items: 22 serious and 2 other-than-serious.
Penalties were first proposed at $44,331 and now stand at $25,632, 42% lower after settlements or reviews.
Lead in general industry comes up most often in these citations: 17 items under 1910.1025.
How that compares: the median penalty per cited inspection for wholesale employers since 2015 is $3,425, and Progress Rail Services Corporation averages $6,882 (1 cited inspection).
1 inspection on this page followed a fatal incident.
Progress Rail Services Corporation also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
100employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Progress Rail Services Corporation and get notified the morning OSHA posts a new citation for it.
Incident on Feb 20, 2020: Employee amputates fingertip in cup polishing machine cylind
At 1:00 a.m. on February 20, 2020, an employee working as a production supervisor for a railroad rolling stock manufacturer was troubleshooting a cup polisher machine. The employee placed his left hand under the cylinder when it cycled and caught the tip of his middle finger. The employee amputated his fingertip and was hospitalized.
Incident on Jul 17, 2002 (fatal): Employee is electrocuted while repairing electric welder
On July 18, 2002, Employee #1, an electrician was replacing a relay switch on a Miller Electric Welder, Model 300. Employee #1 turned the switch on the welder t o the off position, however he neither turned the off, nor lockout the 480 volt (v) main disconnect. Employee #1 picked up the replacement part in his left hand while holding a screw driver in his right hand. Employee #1 squatted down and s tarted to remove the lug screw on one off the legs, when he fell backwards backw ard screaming for help. Employee #1 was electrocuted. A reading of each leg show ed voltage as follows: L1 = 291v, L2=291v and L3=292v, an overall reading of 500 v.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Albertville site logged 0 recordable injuries or illnesses among about 10 workers: 0.0 per 100 full-time workers, against a median of 1.3 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Albertville Frog & Switch
Albertville · 2025
10
0
0
0.0
1.3
Included with any plan: 2 more yearly logs from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was pumping out a parts washer. He went to remove the rear and mid floor panels from the washer and placed his right foot on a structural cross member. As he reached to remove the rear panel cover his right foot slipped into the front right reservoir and was partially submerged in hot water. He sustained burns to his right foot, ankle, and shin.
(2) Other substances—8-hour Time Weighted Averages. An employee's exposure to any substance in Table Z-1, the exposure limit of which is not preceded by a “C”, shall not exceed the 8-hour Time Weighted Average given for that substance in any 8-hour work shift of a 40-hour work week.
29 CFR 1910.1000(e)
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
(d) Exposure monitoring—(1) General. (i) Determinations of employee exposure shall be made from breathing zone air samples that are representative of the 8-hour TWA and 30-minute short-term exposures of each employee.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.