Safe Harbor Access Systems II LLC: OSHA inspections and violations
Quinby, South Carolina · Fabricated Structural Metal Manufacturing · NAICS 332312
5inspections
34citation items
$27,387current penalties
Oct 14, 2025last inspection
Since 2011, OSHA inspectors have visited Safe Harbor Access Systems II LLC in South Carolina 5 times.
The most recent inspection opened on Oct 14, 2025 after a complaint, in Quinby and is still open.
In all, OSHA issued 34 citation items: 24 serious and 10 other-than-serious.
The proposed penalties came to $33,525; today they stand at $27,387, 18% less.
The rule cited most here is 1910.179 (overhead and gantry cranes), 8 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Safe Harbor Access Systems II LLC averages $6,328 across 4 cited inspections.
Safe Harbor Access Systems II LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
South Carolina · latest 90 days of OSHA records
42employers cited
Get notified the morning OSHA posts each new citation in South Carolina: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Safe Harbor Access Systems II LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Florence site logged 2 recordable injuries or illnesses among about 66 workers: 2.9 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Safe Harbor Access Systems II LLC
Florence · 2025
66
2
0
2.9
3.6
Safe Harbor Access Systems II, LLC
Florence · 2024
63
1
0
1.6
3.6
Included with any plan: 4 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(6)(ii)
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in South Carolina the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.