Since 1988, OSHA inspectors have visited Schaffner Manufacturing Co ., Inc in Pennsylvania 3 times.
The most recent inspection opened on May 13, 2016 as a planned inspection, in Emsworth.
In all, OSHA issued 32 citation items: 12 serious and 20 other-than-serious.
The proposed penalties came to $6,251; today they stand at $3,936, 37% less.
The rule cited most here is 1910.95 (noise), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Schaffner Manufacturing Co ., Inc averages $2,886 across 1 cited inspection.
Schaffner Manufacturing Co ., Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
277employers cited
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Schaffner Manufacturing Co ., Inc and get notified the morning OSHA posts a new citation for it.
OSHA records show Schaffner Manufacturing Co ., Inc at 3 sites in 2 states. Together they've had 4 inspections and $7,586 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Pittsburgh site logged 9 recordable injuries or illnesses among about 155 workers: 6.3 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Schaffner Manufacturing Co., Inc
Pittsburgh · 2018
155
9
0
6.3
2.6
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Table Z-3. An employee's exposure to any substance listed in Table Z-3, in any 8-hour work shift of a 40-hour work week, shall not exceed the 8-hour time weighted average limit given for that substance in the table.
29 CFR 1910.1000(e)
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
(6) Wiring type approved. Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined shall be of explosion-proof type approved for Class I, group D locations and shall otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations. Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spraying area, and not separated therefrom by partitions, shall not produce sparks under normal operating conditions and shall otherwise conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.