OSHA has inspected Standard Motor Products 3 times in South Carolina since 2009.
The latest one began on Feb 12, 2025 after a complaint, in Greenville.
Those inspections ended with 18 citation items: 15 serious and 3 other-than-serious.
Penalties were first proposed at $4,500 and now stand at $3,900, 13% lower after settlements or reviews.
Spray painting and finishing comes up most often in these citations: 5 items under 1910.107.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Standard Motor Products averages $900 (1 cited inspection).
Standard Motor Products also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
South Carolina · latest 90 days of OSHA records
42employers cited
Get notified the morning OSHA posts each new citation in South Carolina: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Greenville site logged 5 recordable injuries or illnesses among about 276 workers: 1.8 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 11 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Standard Motor Products, Inc.
Greenville · 2025
276
5
2
1.8
2.7
Standard Motor Products
Greenville · 2025
276
5
2
1.8
2.7
Standard Motor Products Greenville Operations
Greenville · 2023
250
4
2
1.7
2.7
Standard Motor Products Greenvill
Greenville · 2021
332
7
3
2.1
2.7
Included with any plan: 7 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) Fire resistance. Storage cabinets shall be designed and constructed to limit the internal temperature to not more than 325 °F. when subjected to a 10-minute fire test using the standard time-temperature curve as set forth in Standard Methods of Fire Tests of Building Construction and Materials, NFPA 251-1969, which is incorporated by reference as specified in § 1910.6. All joints and seams shall remain tight and the door shall remain securely closed during the fire test. Cabinets shall be labeled in conspicuous lettering, “Flammable—Keep Fire Away.”
29 CFR 1910.106(e)(6)(ii)
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
(6) Wiring type approved. Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined shall be of explosion-proof type approved for Class I, group D locations and shall otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations. Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spraying area, and not separated therefrom by partitions, shall not produce sparks under normal operating conditions and shall otherwise conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations.
Alert subscribers get notified of each newly cited employer in South Carolina the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.