Decatur, Alabama · All Other Miscellaneous Manufacturing · NAICS 339999
7inspections
25citation items
$12,004current penalties
Aug 12, 2021last inspection
Since 1976, OSHA inspectors have visited Sue Jac, Inc. in Alabama 7 times.
The most recent inspection opened on Aug 12, 2021 on a referral, in Decatur.
In all, OSHA issued 25 citation items: 6 serious and 19 other-than-serious.
The proposed penalties came to $17,733; today they stand at $12,004, 32% less.
The rule cited most here is 1910.212 (machine guarding), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Sue Jac, Inc. averages $4,874 across 1 cited inspection.
Sue Jac, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Incident on Aug 5, 2021: Employee amputates finger in cylinder while operating shear
At 11:55 a.m. on August 5, 2021, an employee working as a machine operator for a fabricated structural metal manufacturer was operating a shear press machine. The employee caught his right hand in the press cylinder. The employee was hospitalized to treat an amputation to his middle finger.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2016, the Decatur site logged 0 recordable injuries or illnesses among about 53 workers: 0.0 per 100 full-time workers, against a median of 0.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Sue-Jac Inc.
Decatur · 2016
53
0
0
0.0
0.6
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
(3) Design, construction, and capacity of storage cabinets—(i) Maximum capacity. Not more than 60 gallons of Category 1, 2, or 3 flammable liquids, nor more than 120 gallons of Category 4 flammable liquids may be stored in a storage cabinet.
29 CFR 1910.106(e)(6)(ii)
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
(b) Spray booths—(1) Construction. Spray booths shall be substantially constructed of steel, securely and rigidly supported, or of concrete or masonry except that aluminum or other substantial noncombustible material may be used for intermittent or low volume spraying. Spray booths shall be designed to sweep air currents toward the exhaust outlet.
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.