Dentalez Alabama, Inc.: OSHA inspections and violations
Bay Minette, Alabama · Dental Equipment and Supplies Manufacturing · NAICS 339114
4inspections
15citation items
$37,711current penalties
Oct 17, 2024last inspection
OSHA has inspected Dentalez Alabama, Inc. 4 times in Alabama since 2014.
The latest one began on Oct 17, 2024 as a planned inspection, in Bay Minette.
Those inspections ended with 15 citation items: 10 serious and 5 other-than-serious.
Penalties were first proposed at $56,400 and now stand at $37,711, 33% lower after settlements or reviews.
Forklifts and other powered industrial trucks comes up most often in these citations: 2 items under 1910.178.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Dentalez Alabama, Inc. averages $11,237 (3 cited inspections).
Dentalez Alabama, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Bay Minette site logged 0 recordable injuries or illnesses among about 59 workers: 0.0 per 100 full-time workers, against a median of 1.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
DentalEZ Alabama, Inc.
Bay Minette · 2025
59
0
0
0.0
1.1
DentalEZ Alabama, Inc
Bay Minette · 2024
55
0
0
0.0
1.1
Equipment
Bay Minette · 2020
60
1
0
2.0
1.1
Included with any plan: 5 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(10) Illumination. When spraying areas are illuminated through glass panels or other transparent materials, only fixed lighting units shall be used as a source of illumination. Panels shall effectively isolate the spraying area from the area in which the lighting unit is located, and shall be of a noncombustible material of such a nature or so protected that breakage will be unlikely. Panels shall be so arranged that normal accumulations of residue on the exposed surface of the panel will not be raised to a dangerous temperature by radiation or conduction from the source of illumination.
29 CFR 1910.107(c)(6)
(6) Wiring type approved. Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined shall be of explosion-proof type approved for Class I, group D locations and shall otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations. Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spraying area, and not separated therefrom by partitions, shall not produce sparks under normal operating conditions and shall otherwise conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations.
(ii) Product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals, and which, in conjunction with the other information immediately available to employees under the hazard communication program, will provide employees with the specific information regarding the physical and health hazards of the hazardous chemical.
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.