Georgia-Pacific has 39 OSHA inspections on record in Alabama, the first in 1973.
OSHA's last visit started on Aug 28, 2020 on a referral, in Pennington.
Across those inspections OSHA issued 53 citation items: 21 serious and 32 other-than-serious.
OSHA proposed $87,025 in penalties. After settlements and reviews the total is $60,275, down 31%.
Most often, OSHA cited 1910.265, sawmills (9 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Georgia-Pacific averages $6,615 over 5 cited inspections in that time.
2 inspections on this page followed a fatal incident.
Georgia-Pacific also files yearly injury logs with OSHA, summarized below.
It reported 7 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
100employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
OSHA records show Georgia-Pacific at 114 sites in 9 states. Together they've had 553 inspections and $783,148 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 114 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Aug 26, 2020: Employee amputates hand when caught in pinch point
At 1:30 p.m. on August 26, 2020, an employee was adjusting the third coater landing side wipe. The employee stepped into a walkway inside the machine. While adjusting the wipe, the employee's hand slipped into the roller nip point while the machine was energized. The employee amputated a hand and was hospitalized.
Incident on Apr 17, 2019: Employee's thumb is fractured by suspended load
At approximately 6:30 p.m. on April 17, 2019, an employee was changing out the wire roller. The doctor blade holder fell and the employee sustained a fractured thumb. The employee was hospitalized for these injuries.
Incident on Aug 3, 2017: Employee's arm is fractured when pulled into the tale pulley
At approximately 6:30 a.m. on August 3, 2017, an employee was cleaning with a rake around the chip belt conveyor area. The employee using a rake tried to dislodge a stick jam in an oversize chip conveyor. The employee's arm was pulled into the tale pulley belt of the conveyor. The employee's left arm was fractured for which he was hospitalized.
Incident on Feb 2, 2017: Employee's fingertip is amputated when caught in machine
At approximately 1:45 a.m. on February 2, 2017, Employee #1 was checking the tension on a belt to determine why the chip disc scalper stopped running. He pulled an unsecured guard backwards that was protecting the belt and pulley and placed his hand on the belt to check the tension. A coworker, the machine operator, started the chip disc scalper and Employee #1's finger was caught between the belt and pulley, amputating his fingertip. Employee #1 was not hospitalized.
Incident on Jul 22, 1989 (fatal): Employee killed when run over by fork lift truck
At 12:45 p.m. on July 22, 1989, Employee #1, a janitor, was in a crouched positi on painting a support beam for the roof. The beam was immediately adjacent to th e travel lane for fork lift trucks. Employee #1 was struck by the load on a fork lift truck and partially run over by the load on the forks. Employee #1 was pro nounced dead at the scene.
Incident on Dec 2, 1988 (fatal): Employee killed when burned by fly ash
Employee #1 was inspecting a mill boiler and associated compartments, which had been idling for approximately 21 hours. When Employee #1 opened the inspection d oor to a fly ash collector, the opening of the door resulted in an influx of air that apparently caused the bridged dust to flame up, weaken, and fall out, stri king Employee #1 and igniting his clothing. Employee #1 died of his burns.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Brewton site logged 0 recordable injuries or illnesses among about 25 workers: 0.0 per 100 full-time workers, against a median of 0.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Apache - Georgia Pacific
Brewton · 2025
25
0
0
0.0
0.1
Apache - Georgia Pacific Brewton
Brewton · 2020
12
0
0
0.0
0.1
AL207 Naheola Paper
Pennington · 2018
914
16
8
1.8
1.9
AL217 Alabama River Cellulose
Perdue Hill · 2018
433
11
4
1.9
1.9
AL006 Brewton Bleach Board
Brewton · 2018
435
11
5
2.2
1.9
AL030 Fayette Sawmill
Belk · 2018
134
3
1
2.2
4.2
AL229 Monroeville Particleboard
Monroeville · 2018
95
2
0
1.9
3.9
AL048 Talladega Lumber Mill
Talladega · 2018
84
4
1
4.8
4.2
Included with any plan: 15 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 7 reports on file, the 6 most recent shown.
A maintenance employee was servicing a piston cylinder when the rod and rod head came loose from the framework holding it. He and another maintenance employee were lifting the cylinder with a hoist and the cylinder head fell approximately 20-24" and struck the employee's left ring finger, causing a fracture and a partial degloving. The employee was hospitalized and required surgery.
A coater operator was working at a board machine, adjusting the coater wipe at the coater rolls. The rolls caught the employee's right forearm, crushing it. He was hospitalized and his right hand was surgically amputated.
An employee was helping to load paper onto trucks and was cutting a nylon cord with a paper knife when the knife severely lacerated his right hand. Gloves were not worn at the time of the incident.
An employee was walking in the product unit basement area when he stepped on a drain cover for a U-drain that was not fully seated, causing him to twist/roll his ankle and break his leg.
Aug 3, 2017, Belk: Hospitalization · fractures · arm(s), unspecified
An employee was using a rake to dislodge a stick jam in an oversized chip conveyor when his left arm was pulled into the conveyor belt. His arm broke, requiring hospitalization.
Feb 2, 2017, Perdue Hill: Amputation · amputations · fingertip(s)
An employee was troubleshooting a malfunctioning descalper machine when the employee's right middle finger was pinched and amputated between a belt and pulley. The belt was guarded at the time.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
(2) Hepatitis B Vaccination. (i) Hepatitis B vaccination shall be made available after the employee has received the training required in paragraph (g)(2)(vii)(I) and within 10 working days of initial assignment to all employees who have occupational exposure unless the employee has previously received the complete hepatitis B vaccination series, antibody testing has revealed that the employee is immune, or the vaccine is contraindicated for medical reasons.
(ii) The label may be transmitted with the initial shipment itself, or with the safety data sheet that is to be provided prior to or at the time of the first shipment; and,
29 CFR 1910.1200(g)(1)
(g) Safety data sheets. (1) Chemical manufacturers and importers shall obtain or develop a safety data sheet for each hazardous chemical they produce or import. Employers shall have a safety data sheet in the workplace for each hazardous chemical which they use.
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.