Kard Welding, Inc.: OSHA inspections and violations
Minster, Ohio · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
8inspections
38citation items
$66,948current penalties
Sep 23, 2025last inspection
OSHA has inspected Kard Welding, Inc. 8 times in Ohio since 1992.
The latest one began on Sep 23, 2025 on a referral, in Minster.
Those inspections ended with 38 citation items: 27 serious and 11 other-than-serious.
Penalties were first proposed at $118,661 and now stand at $66,948, 44% lower after settlements or reviews.
Overhead and gantry cranes comes up most often in these citations: 6 items under 1910.179.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Kard Welding, Inc. averages $12,244 (4 cited inspections).
Kard Welding, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
267employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Jan 29, 2021: Employee amputates fingertip in pinch point
At 7:15 p.m. on January 29, 2021, an employee was cleaning shot off a flat plate that runs on rollers leading to a Wheelabrator. The employee's gloved left hand was caught between the plate and the rollers in a pinch point. He received crushing injuries to the four fingers of the left hand, resulting in amputations of the middle and ring fingertips and was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Minster site logged 8 recordable injuries or illnesses among about 69 workers: 16.9 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 136 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Kard Welding 2025
Minster · 2025
69
8
3
16.9
3.6
Kard Welding Inc 2024
Minster · 2024
44
1
0
2.3
3.6
Kard Welding, Inc. 2023
Minster · 2023
40
9
2
20.6
3.6
Kard Welding, Inc.
Minster · 2022
41
1
0
2.4
3.6
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was using a crane to load steel plates onto a trailer. As he raised the crane up, one side of the clamp was not unhooked, which pulled the steel plate over onto the employee. They suffered a crushed left leg and right ankle.
Jan 29, 2021, Minster: Amputation · amputations · fingertip(s)
On January 29, 2021, two employees were sweeping shot off a 10,000-pound metal plate, which was moving on a conveyor. One employee's glove was caught in a moving roller, causing his hand to be pinched between the roller and bottom of the metal plate. He suffered two fingertip amputations and two crushed fingers.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(5) Combustible residues, areas. Unless specifically approved for locations containing both deposits of readily ignitable residue and explosive vapors, there shall be no electrical equipment in any spraying area, whereon deposits of combustible residues may readily accumulate, except wiring in rigid conduit or in boxes or fittings containing no taps, splices, or terminal connections.
29 CFR 1910.107(c)(6)
(6) Wiring type approved. Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined shall be of explosion-proof type approved for Class I, group D locations and shall otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations. Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spraying area, and not separated therefrom by partitions, shall not produce sparks under normal operating conditions and shall otherwise conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations.
29 CFR 1910.107(g)(2)
(2) Cleaning. All spraying areas shall be kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary. Scrapers, spuds, or other such tools used for cleaning purposes shall be of nonsparking material.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.