OSHA has inspected Unicast Company 22 times in Pennsylvania since 1981.
The latest one began on Oct 3, 2023 after a fatality or catastrophe, in Boyertown.
Those inspections ended with 66 citation items: 37 serious and 29 other-than-serious.
Penalties were first proposed at $56,681 and now stand at $41,946, 26% lower after settlements or reviews.
Respiratory protection comes up most often in these citations: 8 items under 1910.134.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Unicast Company averages $10,325 (3 cited inspections).
2 inspections on this page followed a fatal incident.
Unicast Company also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
285employers cited
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
Incident on Sep 8, 2023 (fatal): Employee is killed when crushed by machine
At 5:45 a.m. on September 8, 2023, an employee was standing on a surface in wheelabrator #7, cleaning castings from the machine. The employee was reaching into the bucket to pull castings out that did not fall out when the bucket was lifted. The wheelabrator #7 machine turned on while the employee was working and moved the bucket, pinching the employee between a metal bar the bucket bar. The employee was killed.
Incident on Jul 10, 2017: Employee's finger tip is amputated when cleaning a sinto mol
At 12:50 p.m. on July 10, 2017, an employee was operating a Sinto mold machine. The molds began to break apart. The sand from the broken molds was building up under the machine. The build-up of sand interfered with a proximity sensor. As the employee was removing the sand from around the proximity sensor to get the machine operational, the machine cycled and the employee's middle left fingertip was amputated.
No citations from this inspection.
Inspection 333310423 OPENED APR 11, 2012Closed
Planned · No inspection · Health · 40 employees at the site · Closed Apr 12, 2012
Incident on Aug 31, 2004 (fatal): Employee is crushed by machine
On August 31, 2004, an employee was removing a stuck work platform from the unde rneath portion of a large mold index machine table. As the employee positioned h imself between the mold discharge chute support leg and the leg of the stuck pla tform, the machine was activated by a coworker causing the platform leg to rotat e and advance approximately 36 in. forward, striking the employee. The employee received crushing injuries to his chest and abdominal area. The employee was tra nsported to Pottstown Memorial Medical Center, where he was declared dead.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Boyertown site logged 7 recordable injuries or illnesses among about 49 workers: 13.2 per 100 full-time workers, against a median of 5.4 for its industry. Those cases cost 353 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Unicast Company
Boyertown · 2025
49
7
1
13.2
5.4
Unicast Inc
Easton · 2025
34
0
0
0.0
2.6
Included with any plan: 18 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was checking to see if the proximity switch in a mold handling machine was blocked when the machine moved and caught the employee's middle fingertip between a bracket and a mold cart. The employee's fingertip was amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) Table Z-3. An employee's exposure to any substance listed in Table Z-3, in any 8-hour work shift of a 40-hour work week, shall not exceed the 8-hour time weighted average limit given for that substance in the table.
29 CFR 1910.1000(e)
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
(2) Initial determination. Each employer who has a workplace or work operation covered by this standard shall determine if any exployee may be exposed to lead at or above the action level.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.