Since 1976, OSHA inspectors have visited Watry Industries, LLC in Wisconsin 28 times.
The most recent inspection opened on May 3, 2023 after a complaint, in Sheboygan.
In all, OSHA issued 81 citation items: 28 serious, 4 repeat and 49 other-than-serious.
The proposed penalties came to $144,098; today they stand at $76,119, 47% less.
The rule cited most here is 1910.212 (machine guarding), 14 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Watry Industries, LLC averages $7,467 across 8 cited inspections.
Watry Industries, LLC also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Inspection 344268446 OPENED AUG 28, 2019Closed
Referral · Partial · Safety · 118 employees at the site · Closed Feb 24, 2020
3312 Lakeshore Drive, Sheboygan, WI 53081 · Aluminum Foundries (except Die-Casting) · OSHA's record · Phone and website on Google Maps
Incident on Aug 19, 2019: Employee's finger is amputated by bandsaw blade
At 3:20 p.m. on August 19, 2019, an employee was operating a vertical bandsaw. The employee was working in Bay 26, cutting the gates from the hot aluminum casted parts on a MBD vertical contour bandsaw, when his right middle finger tip was amputated from contact with the blade. The employee was wearing Souther gloves (model 7900BLG Kevlar gauntlet), safety glasses, and hearing protection while operating the vertical contour bandsaw. The employee suffered a right middle finger amputation to the first knuckle and was treated without hospitalization.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 1 |
Serious | $10,741 | $5,370 | Sep 27, 2019 | Final |
Inspection 344151113 OPENED JUL 17, 2019Closed
Referral · Partial · Safety · 118 employees at the site · Closed Nov 8, 2019
3312 Lakeshore Drive, Sheboygan, WI 53081 · Aluminum Foundries (except Die-Casting) · OSHA's record · Phone and website on Google Maps
Incident on Jul 10, 2019: Employee is burned by molten metal after sow falls in furnac
At 6:15 a.m. on July 10, 2019, an employee was using a Toyota Model 8FGCU25 Propane Forklift to place a sow mold on the ledge of a furnace to dry it before placing it in into the molten 1280 to 1500 degrees Fahrenheit molten aluminum. The sow was approximately 39 inches wide on the top with a depth of 9 ? inches and 22 inches wide at the bottom with a depth of 5 inches. The ledge was U shaped and approximately 16 inches deep and 7 feet long. During the placement of the sow on the ledge, the sow fell off the forklift forks and into the furnace melt area resulting in molten metal being spewed over the top of the forklift and landing on the employee, forklift, forks and floor. It is unclear if the dimensions of the sow contributed to the incident, but it was top heavy and wider than the ledge at the base. The employee backed up and attempted to leave the forklift, but molten aluminum melted the metal buckle which trapped the employee. A coworker heard the commotion and ran to the employee to assist in brushing off metal and pulling off the seatbelt to free him. Three other coworkers ran to the area with fire extinguishers to put out the resulting fire. Once the employee was freed coworkers moved him to an area where there was cold air prior EMT's transporting him to a hospital. The employee was hospitalized with burns to his back and right forearm which required skin grafts to his arm.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 2 |
Serious | $10,741 | $5,370 | Sep 27, 2019 | Final |
| Citation 1, item 3 |
Serious | $5,217 | $2,608 | Sep 27, 2019 | Final |
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Sheboygan site logged 12 recordable injuries or illnesses among about 109 workers: 9.4 per 100 full-time workers, against a median of 5.4 for its industry. Those cases cost 50 days away from work.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Sep 1, 2020, Sheboygan: Hospitalization · heat (thermal) burns, unspecified · multiple body parts, unspecified
An employee was charging an aluminum furnace by adding a solid aluminum ingot into the molten aluminum bath. When the ingot was added, an explosion occurred and the employee sustained burns to multiple parts of the body.
Aug 19, 2019, Sheboygan: Amputation · amputations · fingertip(s)
An employee was using a band saw to cut gating off of a part when the employee contacted the saw blade, resulting in an amputation to the right middle fingertip.
Jul 10, 2019, Sheboygan: Hospitalization · heat (thermal) burns, unspecified · arm(s), unspecified
An employee was moving a piece of aluminum into a furnace. The aluminum fell off the forklift that was transporting it, landed in molten aluminum, and created a splash that caused molten aluminum to burn the employee's arm.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.