Wayne Farms, LLC has 43 OSHA inspections on record in Alabama, the first in 2004.
OSHA's last visit started on Oct 21, 2024 after a fatality or catastrophe, in Decatur.
Across those inspections OSHA issued 61 citation items: 38 serious, 2 repeat and 21 other-than-serious.
OSHA proposed $361,138 in penalties. After settlements and reviews the total is $245,924, down 32%.
Most often, OSHA cited 1910.147, lockout/tagout (13 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,875. Wayne Farms, LLC averages $11,064 over 12 cited inspections in that time.
4 inspections on this page followed a fatal incident.
Wayne Farms, LLC also files yearly injury logs with OSHA, summarized below.
It reported 34 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Incident on Oct 19, 2024 (fatal): Employee dies from head trauma when struck by high pressure
At 6:23 p.m. on October 19, 2024, an employee working as a machine maintenance technician was attempting to drain water from a boiler to prevent the boiler from overflowing. Once the employee opened the drain valve, the discharge pipe rotated from a horizontal position over 180 degrees due to the amount of pressure on the pipe and the pipe not being secured. The employee died after being struck by in the head by the pipe.
Incident on Nov 23, 2020: Employee slips and falls, breaks forearm
At 9:49 p.m. on November 23, 2020, Employee #1 was walking in the Eat Department area when she slipped and fell to the ground. The employee sustained a broken left forearm as a result of the fall onto the concrete floor. Emergency services were called, and the employee was transported to the hospital, where she was admitted and treated for the injury.
Incident on Feb 25, 2020: Employee operating wing saw suffers thumb amputation
At 8:39 a.m. on February 25, 2020, an employee was cutting chicken wings using a wing saw. A coworker came up to the employee and tapped him on the shoulder, causing him to look away from his work. The employee was distracted, and his right thumb came into contact with the blade of the wing saw. The employee's right thumb was partially amputated and was treated without hospitalization.
No citations from this inspection.
Inspection 344553938 OPENED JAN 13, 2020Closed
Referral · Partial · Safety · 900 employees at the site · Closed Mar 4, 2020
Incident on Jan 6, 2020: Employee lacerates abdomen while deboning chicken leg
At 8:30 p.m. on January 6, 2020, an employee was deboning a whole chicken leg with a knife. His knife slipped and he tried to catch the knife. The employee sustained an abdomen laceration and was hospitalized.
No citations from this inspection.
Inspection 344491642 OPENED DEC 5, 2019Closed
Referral · Partial · Safety · 10,000 employees at the site · Closed Feb 26, 2020
Incident on Dec 2, 2019: Employee's finger is amputated in machine
At 8:30 p.m. on December 2, 2019, an employee was working on the liver harvesting line. The employee's finger made contact with a fixed blade. The employee was hospitalized to treat an amputation of the right index finger to the first joint.
Incident on Sep 25, 2019: Employee amputates finger when reaching into packaging machi
At 6:00 p.m. on September 25, 2019, an employee working for a poultry processing plant was trying to align the bags going through a packaging/sealing machine. The employee was making empty bags and pulling them out by reaching up into the machine from the bottom. The employee did not feel a bag and reached higher thinking that an empty bag was still in the machine. The employee caught her left index finger in the film cutter amputating it and requiring medical treatment without hospitalization.
Incident on Jun 27, 2019: Employee exposed to acid gas suffers respiratory distress
At 12:00 noon on June 27, 2019, an employee was exiting the facility due to an peri-acidic gas release when he passed through a acid gas cloud. The employee suffered respiratory distress and was hospitalized.
No citations from this inspection.
Inspection 344099312 OPENED JUN 19, 2019Closed
Complaint · Partial · Health · 875 employees at the site · Closed Aug 2, 2019
Incident on Dec 21, 2017: Employee's wrist is fractured when pulled into conveyor belt
At 4:15 p.m. on December 21, 2017, an employee was spraying high pressure water on a conveyor belt to remove waste particles. During spraying, his gloved left hand was pulled into the machine, fracturing his wrist. The employee was hospitalized and received treatment for his injury.
No citations from this inspection.
Inspection 342622875 OPENED SEP 6, 2017Closed
Referral · Partial · Safety · 10,000 employees at the site · Closed Jan 10, 2018
Incident on Sep 2, 2017: Employee is caught in chiller and fractures arm
At 1:45 a.m. on September 2, 2017, an employee had begun the process of draining a large chiller in preparations for sanitation work. The employee reached into the chiller while it was still in operation to retrieve a chicken from the bottom of the chiller. One of the paddles in the chiller caught the employees right arm between the tank wall and paddle, lacerating and fracturing his right arm.
Incident on Mar 20, 2017: Employee falls from ladder and injures back
At 12:20 a.m. on March 20, 2017, an employee was conducting sanitation clean up on a conveyor belt while using an 8 foot ladder. The employee advanced up the ladder, lost his balance and fell approximately 6 feet to the floor below, resulting in fractured vertebrae and internal bleeding.
No citations from this inspection.
Inspection 342075256 OPENED JAN 26, 2017Closed
Referral · Partial · Safety · 375 employees at the site · Closed Dec 14, 2021
Incident on Jan 18, 2017: Employee's hand is caught in breading machine, fracturing ha
At approximately 10:30 p.m. on January 18, 2017, Employee #1 was operating a Nothum Accu Feeder breading machine and adding bread mix to its hopper. He decided to remove a guard on the machine. While the machine was running, his hand was caught in the hopper. The machine fractured and degloved his right hand and forearm. Employee #1 was transported to a medical center, where he received treatment and was then hospitalized.
No citations from this inspection.
Inspection 342043189 OPENED JAN 18, 2017Closed
Complaint · Partial · Safety · 300 employees at the site · Closed Jun 19, 2017
Incident on Oct 5, 2011 (fatal): Employee is killed when struck by vehicle
On October 5, 2011, Employee #1, an employee of Wayne Farms LLC, was crossing a road between the parking lot and plant. A vehicle struck Employee #1. Employee # 1 was killed.
No citations from this inspection.
Inspection 315846261 OPENED OCT 4, 2011Closed
Complaint · Complete · Safety · 23 employees at the site · Closed Nov 8, 2011
Incident on Apr 20, 2004 (fatal): Employee killed when his head was caught between cages
On April 20, 2004, Employee #1 was operating a chicken dumper at a poultry proce ssing plant when the cages failed to open after being tilted. The empty cages we ighed approximately 1,000 lbs. Apparently, Employee #1 went in between the cages . His head was caught between the cages when they moved. Employee #1 was killed.
No citations from this inspection.
Inspection 306445495 OPENED MAR 15, 2004Closed
Accident · Partial · Safety · 600 employees at the site · Closed Apr 28, 2005
Incident on Mar 15, 2004 (fatal): Employee is killed in ammonia release
On March 15, 2004, Employee #1 and 40 coworkers had to evacuate the plant due to an Ammonia release that resulted from a power failure. Employee #1 along with t he other employees, was standing at the designated staging area when Employee #1 fell forward bleeding from the mouth. Employee #1 was killed.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Jack site logged 16 recordable injuries or illnesses among about 1,643 workers: 0.9 per 100 full-time workers, against a median of 3.7 for its industry. Those cases cost 127 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Enterprise Plant
Jack · 2024
1,643
16
4
0.9
3.7
Dothan Plant
Dothan · 2024
1,145
25
1
2.2
3.7
Union Springs Plant
Union Springs · 2024
880
15
2
1.8
3.7
Albertville Plant
Albertville · 2024
910
26
7
3.3
3.7
Decatur Fresh Plant
Decatur · 2024
637
13
3
2.0
3.7
Decatur West
Decatur · 2024
452
3
0
0.7
3.0
Decatur East
Decatur · 2024
452
8
3
1.8
3.0
Guntersville Feedmill
Guntersville · 2024
50
3
1
4.0
2.6
Included with any plan: 77 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 34 reports on file, the 6 most recent shown.
Sep 4, 2025, Union Springs: Hospitalization · fractures · thigh(s)
An employee was walking through a storage space near the wash area when they slipped on a piece of debris and fell on the concrete floor. The employee's left femur was fractured.
Dec 14, 2022, Dothan: Hospitalization · fractures · arm(s), unspecified
An employee was using a hose to clean out the scale conveyor belt when he noticed a piece of product stuck in the conveyor. While removing it, the employee's right arm was caught in the running conveyor, resulting in a right arm fracture and hospitalization.
Oct 5, 2022, Decatur: Hospitalization · fractures · lower leg(s)
An employee stepped down onto a stairway with seven risers, putting both of his hands on the rails. He fell onto his arms and slid down the stairway while still holding the rails. His left leg made contact with the concrete floor first, and his tibia and fibula were broken. He was hospitalized, requiring surgery.
Aug 18, 2022, Decatur: Hospitalization · fractures · upper arm(s)
An employee was removing meat from a carcass and tossing the meat onto a conveyor. When he reached through the moving cone line to retrieve a misplaced carcass, the carcass/cone caught their upper left arm and rammed it into a COVID-19 barrier pole. The employee's humerus was fractured.
Aug 18, 2022, Union Springs: Hospitalization · fractures · lower leg(s)
An employee was cleaning/foaming the floors between lines 2 and 3 when they slipped on a piece of chicken skin and twisted their leg. The employee was hospitalized with a fractured tibial plateau.
Mar 10, 2022, Jack: Hospitalization · avulsions, enucleations · forearm(s)
An employee had climbed a ladder to observe the gears in a malfunctioning auto re-hanger. The gears caught the employee's coat sleeve, and he suffered a forearm avulsion.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Implementation—(1) What do I need to do to complete the OSHA 300 Log? You must enter information about your business at the top of the OSHA 300 Log, enter a one or two line description for each recordable injury or illness, and summarize this information on the OSHA 300-A at the end of the year.
29 CFR 1904.29(b)(2)
(2) What do I need to do to complete the OSHA 301 Incident Report? You must complete an OSHA 301 Incident Report form, or an equivalent form, for each recordable injury or illness entered on the OSHA 300 Log.
(a) Basic requirement. Each employer required by this part to keep records of fatalities, injuries, and illnesses must record each fatality, injury and illness that:
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.