Scan-Pac MFG., Inc.: OSHA inspections and violations
Menomonee Falls, Wisconsin · Mechanical Power Transmission Equipment Manufacturing · NAICS 333613
11inspections
38citation items
$56,037current penalties
Dec 27, 2018last inspection
OSHA has inspected Scan-Pac MFG., Inc. 11 times in Wisconsin since 1982.
The latest one began on Dec 27, 2018 after a complaint, in Menomonee Falls.
Those inspections ended with 38 citation items: 30 serious and 8 other-than-serious.
Penalties were first proposed at $103,937 and now stand at $56,037, 46% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 10 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Scan-Pac MFG., Inc. averages $17,267 (2 cited inspections).
Scan-Pac MFG., Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Menomonee Falls site logged 12 recordable injuries or illnesses among about 109 workers: 11.3 per 100 full-time workers, against a median of 4.0 for its industry. Those cases cost 24 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Scan Pac Mfg.
Menomonee Falls · 2023
109
12
4
11.3
4.0
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
An employee was emptying a bag of collected dust from a dust collection system. The bag and the employee's hand were pulled into the airlock hopper valve. The employee's hand was lacerated.
An employee was working on a sanding machine which had just been turned off, when the machine's belts amputated the employee's fingertip. The belts were rotating at the time of the incident.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(2) Other substances—8-hour Time Weighted Averages. An employee's exposure to any substance in Table Z-1, the exposure limit of which is not preceded by a “C”, shall not exceed the 8-hour Time Weighted Average given for that substance in any 8-hour work shift of a 40-hour work week.
29 CFR 1910.1000(e)
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
29 CFR 1910.1020 · Access to employee exposure and medical records
29 CFR 1910.1020(g)(1)(i)
(i) The existence, location, and availability of any records covered by this section;
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.